S. Vagadia Innovatives
S. Vagadia Innovatives
Rajkot, Gujarat
Send SMS
Send E-mail

Custom Profile

Factsheet

Basic Information
IndiaMART TrustSeal
Nature of Business
Manufacturer
Total Number of Employees
11 to 25 People
Year of Establishment
2004
Legal Status of Firm
Sole Proprietorship (Individual)
Annual Turnover
Rs. 1 - 2 Crore
GST No.
24ADAPV4490L1Z5

Our Strengths

Installation Of SVI Domestic Gas Saver :

  • Make sure all burner knobs / taps are on off position.
  • Switch off gas cylinder valve and remove the regulator unit from the cylinder.
  • Carefully remove the rubber tube from the burner and fit the SVI gas saver end marked with “IN” letters.
  • Carefully fit the 4’’ long rubber tube with its one end connected to the gas saver and the other end connected to the burner.
  • Secure the rubber tube on both ends of gas saver.
  • Carefully fix the regulator back to the gas cylinder.
  • Switch on the gas cylinder valve.
  • Ensure that there is no gas leakage. To make sure, check all the fitting ends by applying soap water solution. If bubbles occur then it’s not securely fitted.
  • Congratulations! You have successfully installed your SVI gas saver, which can save up to 25% gas.

Installation Of SVI Commercial Gas Saver :

  • Make sure all burner knobs / taps are on off position.
  • Switch off gas supply valve to stove / burner.
  • Note that SVI gas saver should be kept away from direct heat or flames.
  • Secure female end of gas saver onto the male end of the stove / burner.
  • Secure male end of the gas saver in to the gas connection supply end. Use standard Teflon tape for sealing.
  • Use spanners for proper fitting at all ends. Double check the fittings.
  • Switch on the gas supply.
  • Ensure that there is no gas leakage. To make sure, check all the fitting ends by applying soap water solution. If bubbles occur then it’s not securely fitted.
  • Congratulations! You have successfully installed your SVI gas saver, which cansave up to 25% gas.

Note:

  • Install STRICTLY as per the instructions provided.
  • Do NOT use the gas saver in case of any gas leakage is noticed after the installation.

Installation Of SVI Automobiles Gas Saver :

  • Switch off the gas cylinder valve and remove the pipe between Vaporizer & Carburetor Injection System.
  • SVI fit at one end of the SVI unit marked "IN".
  • Secure the rubber tube up to the ends of brass Nipples, On both sides a the fuel save
  • Check all the points for gas leakage with soap water solution. Ensure that there is no leakage of gas.
  • Congratulation ! You have installed the SVI, which will save up to 28%* of your gas consumption month after month; year after year.
  • Long Rubber tube Carburetor! Injection System

The Installation Procedure:

  • SVI fuel saver is easy install by following installation procedure or you can get a mechanic to install it.
  • When installing SVI fuel saver system on any vehicle it should be placed as close as possible to the Carburetor fuel inlet pipe.
  • With vehicles that have a fuel injection system, SVI fuel saver has to be installed as close as possible to the injectors.
  • With vehicles that have an electronic fuel Injection system, Placing of SVI fuel saver as close as possible to the injectors will prevent the magnetic field created by the super conduction interfering with the electronic operating systems.
  • % of savings will be based on actual parameters
  • Switch off the gas cylinder valve and remove the pipe between Vaporizer & Carburetor Injection System.
  • Secure the rubber tube up to the ends of brass Nipples, On both sides a the fuel save
  • Switch on the gas cylinder valve.
  • Check all the points for gas leakage with soap water solution. Ensure that there is no leakage of gas.
  • Congratulation ! You have installed the SVI, which will save up to 28%* of your gas consumption month after month; year after year.
  • 4" Long Rubber tube Carburetor! Injection System